Before you choose
Compare the details that matter, then check the full product page.
CT1 PMR446 radio pair →
PMR446 446 MHz, 0.5 W ERP, fixed antennas. Intended for regions where this service is permitted; verify local rules before use. Includes two radio packs and a USB charging lead, no wall adaptor. Supplied contents: exactly two olive green compact walkie-talkies with short fixed black antennas, simple dark displays and no text, plus one coiled black USB charging cable.
Check local frequency rules and the device documentation before transmitting. Connector shape and voltage must match the stated model. Keep contacts dry and do not charge damaged cells or use unapproved battery packs.
CT2 FRS radio pair →
Intended for US FRS operation, up to 2 W on supported channels and 0.5 W on channels 8–14. Check local rules and included documentation. Not a PMR446 substitute. Includes two packs and USB lead. Supplied contents: exactly two charcoal grey compact walkie-talkies with short fixed antennas and simple dark displays, plus one coiled USB charging cable.
Check local frequency rules and the device documentation before transmitting. Connector shape and voltage must match the stated model. Keep contacts dry and do not charge damaged cells or use unapproved battery packs.
CT1 clip-on speaker microphone →
For the CT1 accessory socket only. Check the dual-pin connector shown in the product image; other radios may use different wiring. Supplied contents: one black handheld speaker microphone with large side button, metal belt clip, coiled cable and dual-pin radio connector.
Check local frequency rules and the device documentation before transmitting. Connector shape and voltage must match the stated model. Keep contacts dry and do not charge damaged cells or use unapproved battery packs.
CT1 single-earpiece headset →
For CT1 handsets only. Keep the other ear free and set volume low before placing the earpiece. Supplied contents: one black single-ear earbud with foam pad, inline push-to-talk button, lapel clip, long coiled section cable and dual-pin connector.
Check local frequency rules and the device documentation before transmitting. Connector shape and voltage must match the stated model. Keep contacts dry and do not charge damaged cells or use unapproved battery packs.
CT1 acoustic-tube earpiece →
CT1 connector fitting only. Supplied with one silicone ear tip; replace worn or shared tips before use. Supplied contents: one clear coiled acoustic tube ending in one translucent ear tip, attached to black cable with inline talk button and dual-pin connector.
Check local frequency rules and the device documentation before transmitting. Connector shape and voltage must match the stated model. Keep contacts dry and do not charge damaged cells or use unapproved battery packs.
CT1 twin charging cradle →
For CT1 supplied packs only; CT2 radios do not fit. Includes USB cable, requires a 5 V 2 A USB supply sold separately. Supplied contents: one empty black twin-slot walkie-talkie charging cradle with two upright bays and one USB cable, no radios.
Check local frequency rules and the device documentation before transmitting. Connector shape and voltage must match the stated model. Keep contacts dry and do not charge damaged cells or use unapproved battery packs.
Adjustable radio belt pouch →
Compare the radio body measurements without the antenna. Keep controls accessible and test retention before carrying. Supplied contents: one empty olive green nylon radio pouch with adjustable black elastic top strap and rear belt loop.
Check local frequency rules and the device documentation before transmitting. Connector shape and voltage must match the stated model. Keep contacts dry and do not charge damaged cells or use unapproved battery packs.
CT1 replacement belt-clip pair →
Fits the CT1 screw mounting pattern only. Remove the battery before replacing a clip; do not overtighten. Supplied contents: exactly two slim black plastic radio belt clips and exactly two small silver screws.
Check local frequency rules and the device documentation before transmitting. Connector shape and voltage must match the stated model. Keep contacts dry and do not charge damaged cells or use unapproved battery packs.